The new Topping D30 Pro DAC features not one or two but a total of four CS43198 Cirrus Logic DAC chips that handle all of the audio conversion accurately and offers spectacular dynamic range and noise reduction. The inclusion of these chips enables the Topping D30 Pro to achieve a Total Harmonic Distortion Noise rating of 0.00009%, meaning that the audio signal is 99.99991% free of distortion and noise. These specs are remarkable and allow you to enjoy your music without any artefacts. The four CS43198 DAC chips provide a total of 8 fully balanced channels. So each channel of the D30 Pro is arranged in parallel compared to 4 conventional balanced channels. This increases the output capability of the D30 Pro exponentially.

TOPPING D30 Pro is embedded with a 2nd Gen 8 core XMOS XU208 chip along with a USB mode that supports decoding of PCM 32 bit/384kHz and DSD256 natively. Topping D30 Pro comes with customised Thesycon drivers to enhance the Audio Stream Input/Output (ASIO) playback on your Windows computers so you can enjoy your music at the highest quality. ASIO settings can be complicated but not while using the D30 Pro. You can easily connect your D30 Pro to a PC without the need to install drivers. Set your preferred sampling rate, and you are good to go. Kindly note that the Thesycon driver is compatible with PCs working on Windows 7 or above. Mac computers do not require the Thesycon driver to achieve ASIO.

The Topping D30 Pro has been designed to offer connectivity with various devices. To enable this, the D30 Pro features USB, Optical and Coaxial connections on the input stage and a fully balanced XLR and RCA connection for the output stage. The Coaxial and Optical inputs used in the D30Pro supports Dop DSD64 and PCM 24 bit 192kHz natively. Both RCA and XLR outputs have a SINAD over 120dB, meaning that any noise occurring naturally from the system isn’t audible. The Topping D30 Pro features an output selection button with options for “XLR only,” “RCA only,” and “XLR RCA.” This last option lets you run cables to two different destinations, such as a headphone amp and powered monitors, and listen to either without having to do the cable shuffle and use the D30 Pro with multiple systems simultaneously.

The Topping D30 Pro offers pre-amp functionality and doubles as a pre-amplifier, allowing you to control the output volume of destination monitors on its front panel or with the included remote control. Since the D30 Pro’s noise floor is extremely low, 0.9uVrms on the single-ended output and 1.1uVrms on the balanced output, it allows for bumping up the volume of powered monitors without introducing hiss. With the D30 Pro in your audio chain, there is no need to add a separate pre-amplifier for driving your speakers. The Topping D30 has got you covered, and accessing the volume control is very convenient with the included remote control or using the volume knob on the front panel.